 |
|
| |
At BITDMX Racing we not only focus on Performance, but longevity and dependability as well. We put forth special care and attention which provides a high performance service. Ultimately, our goal is to get you the most bang for your buck!
SHOCK OIL CHANGE
We completely disassemble the Shock & thoroughly clean & inspect each & every internal piece. We then reassemble using only the highest quality of oils.
$145.00 - Includes Oil - ( Shock Seal Extra $65.00 )
Recommendations: Shock Seal / Spring / Re-Valve / Remote Reservoir / H.D Bumper.
|
 |
FORK OIL CHANGE
Again, as we do with our Shock Service, we break down the Fork, clean & inspect everything.
$75.00 - Includes Oil - ( Fork & Dust Seals Extra $25.00 )
Recommendations: Internal Modification Kit ( Talk to Us ) Springs / Fork caps.
|
 |
COMPLETE WORKS FORK
Available in both 38 & 43mm. Kit contains:
Billet Fork Cap W / On The Fly Bleed
Titanium Nitride Coating
Machined Lower leg
Lower Leg Option: Powder / Polish / Hard Anodize
SIMONS Internals
H.D Springs
Low Profile Gators
Seal & Bushings
Billet Preload Spacers
Stock Forks Inclusive
All Labor Inclusive
$995.00
|
Our works forks as seen on this restored '79 SR-250 KAWASAKI, belonging to Bob Silvernail. Bob is the GM for Corpus Christ Cycle Center in Texas. Bob is also the owner of the '78 OW400 which is displayed on our "Homepage". Looking to speak with someone down with B.I.T.D MX Racing - Then call Bob! |
SPRING
Having a hard time locating that Heavy Duty Shock Spring for your Post Vintage / EVO YZ Machine. Our Springs are custom Built & Wound from Aircraft Quality Steel, then Powdercoated to a smoking YZ yellow finish. Were sure this is the answer you've been searching for. Available for all: '77 - '79 YZ 125's on up.
Only $110.00
|
 |
SIMONS ANTI - CAVITATION FORK KIT
The name & kit speak for itself. A proven winner matched with any Post Vintage / EVO YZ Machine. If you want the sweet ride & the ride to win, Rock with this kit.
Only $275.00
|
 |
STAINLESS STEEL 304 CAD PLATED GOLD VALVE BODY
Fits all EVO YZ Shocks. Increase dampening & travel. The first step in improving your suspension set up.
$80.00
|
 |
H.D BRAIDED STAINLESS SHOCK HOSE
Our quality shock hose features a stainless steel double woven braid for excellent protection against abrasion, corrosion and heat. This hose will not blow or frey out in the heated battles of todays moto demands! A scientific Elastomer Chlorinated Polyethylen (CPE) inner tube provides braod shock fluid compatibility. Max PSI rates @ 400F / while the pressure max's out @ 1500 max! & while all of this tech data rocks, you have to admit, these lines look trick!
$65.00
|
 |
COMPLETE REMOTE RESERVOIR KIT
1980 - 1984 SHOCK RESERVOIR FIX On some of the Shocks in this era, it's a good idea to upgrade / Replace the stock hose & its crimped fitted cap. We have the correct fix / upgrade for this.
T-6061 Anodized Gold Billet Cap High Performance / Anodized Aluminum / Steel Braided Hose.
( Attached Red Bottle Not Included )
$125.00
|
|
REMOTE RESERVOIR
Designed for the '77 - '79 YZ's. This Gold unit will enable your PVMX sled to run cooler for longer periods of time. Keeps the Oil Polymers from breaking down as they do in stock trim. Equipped with external "Compression Damping Adjustment capabilities, this is the way to go!
$175.00
|
|
WORKS REMOTE RESERVOIR KIT
Upgrade your '77 - '79 YZ & enjoy the benefits of additional cooling & fade free performance, while you '80 - '84 YZ pilots can replace your existing out of date piston operated reservoir unit & brittle rubber shock hose with our "High Performance Bladder & Shock Hose"set up. Aluminum Rez Bottle features circular grooves for added cooling, while the end caps are machined from T-6061 Billet Stock. Our Lightweight / Stainless Steel / Aluminum fitted Shock Hose is built to resist high temps & pressures. This is a must have for any serious EVO YZ Pilot!
Works Reservoir Kit - $245.00
|
|
FORK CAPS
Machined from T-7075 Billet Aluminum, these clean looking flush type Fork Caps matched with an "On the Fly" Air Bleed System are the answer to completing your Front Suspension System worries.
Dial yourself up a pair today!
Machine Plain Silver - $150.00
Red / Gold / Blue - $165.00
|
 |
REMOTE RESERVOIR BRACKET
On all '77 - '79 modified EVO YZ Machines with an added Reservoir can benefit bigtime from this small welded on / Or bolted on accessory. Depending on the size of the Bottle, determines weather you need just one bracket, or two for the larger Bottles. A sano way to fly! Don't get caught without a nice warm bed for your cooling buddy to rest in!
$35.00 ( 1 Bracket )
$ 60.00 ( 2 Brackets )
Welding - $20.00 Per Bracket
Welding availble
|
|
BLADDER / SCHRAEDER VALVE / BILLET CAP UPGRADE
For all '80 - '84 EVO YZ machines equipped with a stock shock reservoir. Remove that "Piston" from your reservoir & step up to the modern age of MX life with a "Bladder"! No more shock fade. Enjoy a more consistent feel through the entire range. Retain your nitrogen! A big bang for your bucks upgrade!
$85.00 Complete
|
 |
FORK BUSHINGS
Proper Suspension science starts here! Keep the basics fresh by staying tight & right!
$40.00 & Up
|
 |
SHOCK SEAL HEAD
A quality seal replacement offering excellent performance & a new "Bottom Out Bump Stop". assures your EVO YZ will handle the way it should!
$45.00 & Up
|
 |
SWING ARM BEARING KITS:
Your "Suspension" relies on good "Swingarm Bearings & Grease" in order to operate at it's full potential. Our Bearing kits come with evreything you need to stay plush!
$45.00 & Up
|
|
|
Questions or Comments? Send us an email at: backinthedaymx@comcast.net |
|
