BITDMX SEAT BRACKET KIT
Ditch those beat looking stock seat brackets & replace them with a "Lighter & Stronger" Billet 7075 BITDMX Seat Bracket kit. Not to mention, with your "fresh resto" & shiny new "seat cover" it makes sense to complete the package with some sano billet brackets! Available for all YZ 125 / 250 / 400 / 465 / 490 '77 - '84.

$110 per set

BILLET T-7075 TRIPLE CLAMPS
Available in both 38 & 43mm. Billet Stem Available also. Anodizing available too. When it comes to clamping your EVO YZ down nice & tight - We have the best clamps available for this line of bikes - Period!

INCLUDES:

• BILLET UPPER CLAMP
• BILLET LOWER CLAMP
• BILLET STEM
• BILLET CLAMPS
• UPPER BEARING
• LOWER BEARING
• ALL PRESSED IN & READY TO BOLT ON

$475.00 MACHINED PLAIN SILVER
$525.00 WITH COLORS OF CHOICE

T-7075 BILLET TORQUE ARM
Carved from T- 7075 Billet Stock, this "one piece I Beam fabricated Torque Arm" will bring back the "Pimp Factor" in your EVO YZ ride! Drilled out from one end to the other creates stealth lightness to boot! Pure Works - Grab one now!

$175.00

BILLET T-7075 CHAIN BLOCK ADJUSTERS
Get pimped & get adjusted with these works gems. Lightwieght & great looking. Finish that resto off with a pair of these!

$145.00

T-7075 BILLET FRONT BRAKE LINKAGE
Team YAMAHA ran this system in the day. We feel ours is even better! Get trick! Get light! Get that factory light firm feel at your fingertips!

$110.00

ATTN Customers:
This part is designed to fit the following TLS equipped machines.  FIT'S MODELS:  '80 / '81 YZ 465 / '81 - '84 YZ 250 & the '84 YZ 125.  PART WILL NOT FIT: '77 -'83 YZ  125  or  '77 - '80 YZ 250. EXAMPLE ( TO WIT: A 1979 YZ 250 ) Unless you have upgraded your "Brake-Plate" to accommodate the YZ TLS Linkage.For $45.00 we will Drill / Polish & Anodize your "Existing Linkage Arms". The above information is to protect both vendor & client.

BILLET REAR BRAKE ADJUSTMENT KNOB & BARREL

WHEEL SPACERS
Not only are the BITDMX Wheel Spacers trick looking, these spacers are designed to stay in the wheel seal during removal  & replacement, which eliminates that third hand we wish we hand during Swingarm / Fork area work. Carved from Billet Aluminum. Available in Machine Billet / Anodize Red / Gold / Black or Blue.   

Only $65.00 per set

SHOCK PRELOAD RING
These rings are the ticket for dialing in your preload issues on all of your '77 thru '79 125 / 250 & 400cc YZ machines.  Made of quality 7075 Billet Aluminum, these rings will withstand serious punishing. Available in "1/8 / - "1/4 - "1/2 - "3/4 & "1.  Sold individually, or as a package deal.

Price: $35.00 per ring

T-6061 BILLET CHAIN GUIDE
B.I.T.D. MX has once again paved the way for the EVO YZ machine! Finally a cure for the stock chain guide! After hours of testing, a true Works Billet Chain Guide is now ready for your immediate bolt on pleasure! Lightweight & Stealth looking this Billet unit is graced with "Delron Buffers" both top & bottom to keep your chain tight & right! Carved in a three piece design to Guarantee more rigidity over stock. This is the MX Pilots ticket to the works lane!

Price:
$145.00 Machine Silver
$160.00 Anodized Red / Gold / Black
$165.00 Polished

CLUTCH ACTUATOR ARM EXTENSION
Are you experiencing arm pump after just a lap or two? When you pull off the track, are your arms in "Popeye" mode. Is feathering the clutch even a chore? Well, no more! We have the fix for a very modest price! Carved out of 7075 Billet, this Clutch Actuator Arm Extension bolts right up to your stock arm in minutes, & will have your left forearm loving life.  fits:  '80 - '81 250 / 465  &  '82 - '84 490

ENGINE BRACKETS

Ad these Gold anodized Billet T7075 Engine Brackets to your YZ. Make your ride stealth with a simple bolt on.

Only $60.00

BILLET FRONT BRAKE CABLE JOINT
Billet Heat Treated T-7075 Anodized Red or Gold / Or plain Silver. A stealth looking part that ad's rigidity & promotes a more positive feel at the control lever.

Only $35.00

FORK CAPS
Machined from T70-75 Billet Aluminum, these clean looking flush type Fork Caps matched with an "On the Fly" Air Bleed System are the answer to completing your Front Suspension System worries. 

Dial yourself up a pair! Available in Machine plain for $125.00 or Anodized Red / Blue / Gold or Black for $140.00

BILLET CABLE KEEPER
Keep your front brake cable from getting caught or wrapped around your bike with this simple, yet effective "Billet Cable Keep". Your choice of Red / Gold or Black colors. Hardware included.

$40.00 Includes Shipping!