| |

|
| |
 |
( TLS ) H.D BILLET
FRONT BRAKE LINKAGE:
Team YAMAHA ran this system in the day. We feel ours is even better! Get trick! Get light! Get that factory light firm feel at your fingertips!
$110.00 |
|
|
|
|
| |
|
| |
 |
ALUMINUM BOOST BOTTLE:
Ad response & rev to your engine. Includes spigot / clamps & hose.
$95.00 |
|
|
|
|
| |
|
| |
 |
BILLET FRONT BRAKE CABLE /
NUMBER PLATE GUIDE:
Keep your front brake cable from getting caught or wrapped around your bike with this simple, yet effective "Billet Cable Keep". Your choice of Red / Gold or Black colors. Hardware included.
$40.00 Includes Shipping! |
|
|
|
|
| |
|
| |
 |
BILLET CHAIN BLOCK ADJUSTERS:
Get pimped & get adjusted with these works gems. Lightwieght & great looking. Finish that resto off with a pair of these!
$145.00 |
|
|
|
|
| |
|
| |
 |
BILLET CHAIN GUIDE:
B.I.T.D. MX has once again paved the way for the EVO YZ machine! Finally a cure for the stock chain guide! After hours of testing, a true Works Billet Chain Guide is now ready for your immediate bolt on pleasure! Lightweight & Stealth looking this Billet unit is graced with "Delron Buffers" both top & bottom to keep your chain tight & right! Carved in a three piece design to Guarantee more rigidity over stock. This is the MX Pilots ticket to the works lane!
Price:
$145.00 Machine Silver
$160.00 Anodized Red / Gold / Black
$165.00 Polished |
|
|
|
|
| |
|
| |
 |
BILLET CLUTCH EXT. ARM:
Are you experiencing arm pump after just a lap or two? When you pull off the track, are your arms in "Popeye" mode. Is feathering the clutch even a chore? Well, no more! We have the fix for a very modest price! Carved out of 7075 Billet, this Clutch Actuator Arm Extension bolts right up to your stock arm in minutes, & will have your left forearm loving life. fits: '80 - '81 250 / 465 & '82 - '84 490
Only $40.00
Hardware included. |
|
|
|
|
| |
|
| |
 |
BILLET FORK CAP:
Machined from T70-75 Billet Aluminum, these clean looking flush type Fork Caps matched with an "On the Fly" Air Bleed System are the answer to completing your Front Suspension System worries.
Dial yourself up a pair!
Available in Machine plain for $125.00
or Anodized Red / Blue / Gold or Black for $140.00 |
|
|
|
|
| |
|
| |
 |
BILLET FRONT BRAKE CABLE JOINT:
Billet Heat Treated T-7075 Anodized Red or Gold / Or plain Silver. A stealth looking part that ad's rigidity & promotes a more positive feel at the control lever.
Only $35.00
|
|
|
|
|
| |
|
| |
 |
BILLET REAR BRAKE ADJUSTMENT KNOB:
No more fighting with a small wing-nut! No more pinched fingers! Make easy brake adjustments & ad "Factory Flare" to your machine. Carved from T-6061 Billet Aluminum. Available in Machine Billet / Anodize Red or Gold.
Knob Only - $65.00 Ea. |
|
|
|
|
| |
|
| |
 |
BILLET REED CAGE SPACER:
Increase fuel atomization & increase throttle snap. Includes gasket.
$40.00
|
|
|
|
|
| |
|
| |
 |
BILLET SHOCK PRELOAD SPACER:
These rings are the ticket for dialing in your preload issues on all of your '77 thru '79 125 / 250 & 400cc YZ machines. Made of quality 7075 Billet Aluminum, these rings will withstand serious punishing. Available in "1/8 / - "1/4 - "1/2 - "3/4 & "1. Sold individually, or as a package deal.
Price: $45.00 per ring
|
|
|
|
|
| |
|
| |
 |
BILLET WHEEL SPACERS:
Not only are the BITDMX Wheel Spacers trick looking, these spacers are designed to stay in the wheel seal during removal & replacement, which eliminates that third hand we wish we hand during Swingarm / Fork area work. Carved from Billet Aluminum. Available in Machine Billet / Anodize Red / Gold / Black or Blue.
Only $65.00 per set
|
|
|
|
|
| |
|
| |
 |
BILLET TORQ ARM:
Carved from T- 7075 Billet Stock, this "one piece I Beam fabricated Torque Arm" will bring back the "Pimp Factor" in your EVO YZ ride! Drilled out from one end to the other creates stealth lightness to boot! Pure Works - Grab one now!
$175.00 |
|
|
|
|
| |
|
| |
 |
TEAM DG GRAPHICS:
Dial your '77 - '80 YZ 125 / 250 / 400 in with these pre -cut perforated graphics that will cover your entire gas tank in the famed Team DG look!
Only $75.00
|
|
|
|
|
| |
|
| |
 |
TEAM MOTO - X FOX GRAPHICS:
The name speaks volumes! In the day, the orange & yellow combo meant trick business! Get like Pat Richter, Mark Barnett, Steve Wise, Donnie Cantaloupi, Danny & Jim Turner, Larry Wosick, & Jeff Watts to name a few! A sweet looking kit that will make you the envy in the pits!
KIT INCLUDES: BAR PAD . LEVER COVERS / GRAPHICS / SEAT COVER ONLY
$150.00
|
|
|
|
|
| |
|
| |
 |
BILLET TRIPLE CLAMP SET:
Available in both 38 & 43mm. Billet Stem Available also. Anodizing available too. When it comes to clamping your EVO YZ down nice & tight - We have the best clamps available for this line of bikes - Period!
INCLUDES:
• BILLET UPPER CLAMP
• BILLET LOWER CLAMP
• BILLET STEM
• BILLET CLAMPS
• UPPER BEARING
• LOWER BEARING
• ALL PRESSED IN & READY TO BOLT ON
$475.00 MACHINED PLAIN SILVER
$525.00 WITH COLORS OF CHOICE |
|
|
|
|
| |
|
| |
 |
TEAM YAMAHA GRAPHICS
( U.S & EURO ):
USA
The original Team look! It started it all! Time to give the scoot a face lift, well......clean her up with a BITDMX U.S Team kit! Look like Hannah!
Price: $150
EURO
Want a change of pace? Dare to be different........Remember Stephen Gall & Hiekki Mikkola? Their you have it, "Put the rest to bed & run red".
Price: $150
|
|
|
|
|
| |
|
| |
 |
WERKS ALUMINUM SPROCKETS:
This is a quality aircraft billet aluminum Sprocket dialed into exact tolerances. These sprockets are of high quality. Basic Sprocket in Machine Silver. Cuts & Colors Extra.
Only $50.00
|
|
|
|
|
| |
|
| |
 |
WERKS ONYX STEEL WIDE FOOTPEGZ:
Increase ride control with these two inch wide pegz. Powder-coated Titanium or Black.
Price: $75.00
|
|
|
|
|
| |
|
| |
 |
WERKS H.D POWDERCOATED SHOCK SPRING:
Having a hard time locating that Heavy Duty Shock Spring for your Post Vintage / EVO YZ Machine. Our Springs are custom Built & Wound from Aircraft Quality Steel, then Powdercoated to a smoking YZ yellow finish. Were sure this is the answer you've been searching for. Available for all: '77 - '79 YZ 125's on up.
Only $110.00 |
|
|
|
|
| |
|
| |
Questions or Comments? Send us an email at: backinthedaymx@comcast.net |